Starting from rest, a 12-cm-diameter compact disk takes 2.9 s to reach its operating angular velocity of 2300 rpm. Assume that the angular acceleration is constant. The disk's moment of inertia is 2.5×10−5kgm2.

How much torque is applied to the disk?

Look it up you feel me

The objects do not reach terminal velocity         there is not enough time from the time the object falls from when it hits the ground to achieve terminal velocity. an object must be placed higher to achieve terminal velocity in order to be in free fall.

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

Distance covered, s = 8ft - 4ft = 4 ftinitial velocity, u = 34 ft/sthe acrobat is moving upwards and therefore, a = -g = -9.81 m/s^2 = 32.19 ft/s^2applying equation of motion; s = ut -1/2gt^2then,4 = 34t -1/2*32.19t^24 = 34t - 16.095t^2rearranging; -16.095t^2 + 34t - 4 = 0solving the quadratic equation; t = {-34 +/- sqrt [34^2 - 4(-16.)]}/2(-16.095) = 1.06 +/- 0.93 = 0.13 or 1.99the acrobat will take 0.13 seconds to be at 8 ft above the ground. additionally, once at the maximum height, the acrobat will move down and be at the same spot (that is height) after 1.99 seconds moving down.