subject
Physics, 10.04.2020 23:45 mahogany139

Once more a mysterious metallic sphere has come to ground in Kansas, and the citizens of Hoxie have called in your consulting firm for help in identifying the material in the meteorite, which appears to have magnetic properties. You rush to Hoxie to investigate, but unfortunately your Hall probe device fails, leaving you with only a strong bar magnet and a sensitive compass. Nevertheless, you manage to identify samples from three parts of the meteorite as being diamagnetic, paramagnetic, and ferromagnetic. For your later report, you jot down the measurements and observations you made to establish the identifications. Briefly summarize these for the:

A. Diamagnet
B. Paramagnet
C. Ferromagnet

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 04:20
Awave is produced in a rope. the wave has a speed of 33 m/s and a frequency of 22 hz. what wavelength is produced?
Answers: 2
question
Physics, 22.06.2019 09:00
Agroup of students is studying convection currents. they fill two identical balloons with the same amount of helium. one balloon is placed in a freezer and the other in an area with warm air. after 10 minutes, the balloons are released from a height of 1 meter. which of the following do the students most likely observe? question 2 options: the balloons rise at the same rate. both balloons are the same size. the ballons both rise. the cold ballon is larger than the warm balloon. the cold balloon expands and rises. the warm balloon shrinks and sinks. the warm balloon expands and rises. the cold balloon shrinks and sinks.
Answers: 3
question
Physics, 22.06.2019 15:30
At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12Γ—10βˆ’6 kβˆ’1 and23Γ—10βˆ’6 kβˆ’1 respectively.
Answers: 1
question
Physics, 22.06.2019 23:40
To place a communications satellite into a geosynchronous orbit at an altitude of 22,240 mi above the surface of the earth, the satellite first is released from a space shuttle , which is in a circular orbit at an altitude of 185 mi, and then is propelled by an upper-stage booster to its final altitude. as the satellite passes through a, the booster's motor is fired to insert the satellite into an elliptic transfer orbit. the booster is again fired at b to insert the satellite into a geosynchronous orbit. knowing that the second firing increases the speed of the satellite by 4810ft/s, determine (a.) the speed of the satellite as it approaches b on the elliptic transfer orbit, (b.) the increase in speed resulting from the first firing at a.
Answers: 2
You know the right answer?
Once more a mysterious metallic sphere has come to ground in Kansas, and the citizens of Hoxie have...
Questions
question
Mathematics, 29.10.2020 16:40
Questions on the website: 13722360