Ohm’s Law is represented by the equation I=V/R. Explain how the current would change if the amount of resistance decreased and the voltage stayed the same. (HINT: try plugging numbers into the equation for R, but make sure V stays the same. Then describe what happens to I(current) Click HEREto view a video that will help you

The current will increase with reduction in the resistance.

Explanation:

Electrical resistance reduces the flow of electricity through a conductor just like friction reduces our speed. The higher the resistance the harder it will be for the current to flow and vice versa, hence, higher resistance produces a smaller current if the voltage is held constant. The voltage is the electrical drive.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).