In a hydraulic jack, the pipe below the load has an area of 5 m2, and the pipe through which the input force transmits has an area of 1 m2. Calculate the force required.

kN of input force is necessary to balance a load of 10,000 N.

What are igneous intrusions and extrusions

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

The mini-refrigerator fire was most likely caused by what type of wiring?