5. An infinite wire is 3.00 cm away from and parallel to a 10 cm long wire, and each has a current of 2.50 A in the same direction (for example the top wire of the rectangle in Fig. 4). (a) What is the magnetic field from the infinite wire at the position of the other wire

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

The a992 steel rod bc has a diameter of 50 mm and is used as a strut to support the beam. determine the maximum intensity w of the uniform distributed load that can be applied to the beam without risk of causing the strut to buckle. take f.s. = 2 against bucklin

Anybody wanna ? (picture included? )