subject
Physics, 16.04.2020 22:45 Sumysumy

A rod of 2.0-m length and a square (2.0 mm X 2.0 mm) cross section is made of a material with a resistivity of 6.0 E–8 Ohm meter. If a potential difference of 0.50 V is placed across the ends of the rod, at what rate is heat generated in the rod? *

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 23:30
Two technicians are discussing a resistance measurement between the can-h and can-l wires. technician a says this measurement should be done with the ignition switch in the "run" position. technician b states that a measurement of 0 ohms indicates an open in the network. which technician is correct?
Answers: 3
question
Physics, 22.06.2019 06:30
What is the energy of a photon of ultraviolet radiation with a frequency of 4.4 × 1015 hz? planck’s constant is 6.63 × 10–34
Answers: 3
question
Physics, 22.06.2019 17:00
Air conditioners not only cool air, but dry it as well. suppose that a room in a home measures 5.0m×9.0m×2.4m . if the outdoor temperature is 30 ∘c and the vapor pressure of water in the air is 85 % of the vapor pressure of water at this temperature, what mass of water must be removed from the air each time the volume of air in the room is cycled through the air conditioner? the vapor pressure for water at 30 ∘c is 31.8 torr.
Answers: 3
question
Physics, 22.06.2019 17:40
Which describes an object in projectile motion? check all that apply.a.gravity acts to pull the object downb.the object moves in a straight path.c.the forward velocity of the object is 0 m/s.d.the object’s inertia carries it forward.e.the path of the object is curved.
Answers: 2
You know the right answer?
A rod of 2.0-m length and a square (2.0 mm X 2.0 mm) cross section is made of a material with a resi...
Questions
question
Mathematics, 06.05.2021 06:10
question
Mathematics, 06.05.2021 06:10
question
Mathematics, 06.05.2021 06:10
question
Mathematics, 06.05.2021 06:10
Questions on the website: 13722367