subject
Physics, 21.04.2020 19:56 soccerhannah290

A particle moves in simple harmonic motion with a frequency of 3.00 Hz and an amplitude of 3.30 cm. (a) Through what total distance does the particle move during one cycle of its motion? cm (b) What is it maximum speed? cm/sWhere does this maximum speed occur? as the particle passes through equilibrium at maximum excursion from equilibrium exactly halfway between equilibrium and maximum excursion none of these (c) Find the maximum acceleration of the particle. m/s2Where in the motion does the maximum acceleration occur? as the particle passes through equilibrium at maximum excursion from equilibrium exactly halfway between equilibrium and maximum excursion none of these

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 20:00
Aturntable that spins at a constant 74.0 rpm takes 3.10 s to reach this angular speed after it is turned on. find its angular acceleration (in rad/s2), assuming it to be constant, and the number of degrees it turns through while speeding up.
Answers: 2
question
Physics, 23.06.2019 01:30
The flame produced by the burner of a gas (propane) grill is a pale blue color when enough air mixes with the propane (c3h8) to burn it completely. for every gram of propane that flows through the burner, what volume of air is needed to burn it completely? assume that the temperature of the burner is 195.0°c, the pressure is 1.05 atm, and the mole fraction of o2 in air is 0.210.
Answers: 2
question
Physics, 23.06.2019 03:00
A75-hp (shaft output) motor that has an efficiency of 91.0 percent is worn out and is to be replaced by a high-efficiency motor that has an efficiency of 95.4 percent. the motor operates 4368 hours a year at a load factor of 0.75. taking the cost of electricity to be $0.12/kwh, determine the amount of energy and money saved as a result of installing the high-efficiency motor instead of the standard motor. also, determine the simple payback period if the pu
Answers: 1
question
Physics, 23.06.2019 06:30
Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?
Answers: 2
You know the right answer?
A particle moves in simple harmonic motion with a frequency of 3.00 Hz and an amplitude of 3.30 cm....
Questions
Questions on the website: 13722360