Fill in the (blanks)

Most elements are (blank). The (Blank) elements on the left side of the stairsteps line on the (blank) of elements are metals. Some physical properties of metals are (blank) "shininess", good conductors of (blank) and (blank), and can be hammered into (blank) sheets. Non-metals are found to the (blank) of the stair-step line on the Periodic table of elements. The characters of nonmetal are (blank) to those of metals. Nonmetal have a dull (blank) or (blank). Nonmetals also break easily and are not (blank) or (blank).Metalloids that are on (blank) sides of zig-zag line have both properties of metals and nonmetals. Metalloids can be or dull and can conduct heat and electricity (blank) well.

The integral design hub incorporates thento the bearing unit. n a. cv joint n b. mounting carrier n c. brake rotor n d tie rod end

Mass (kg) force (n) 5 25 10 50 15 75 20 100 a student was trying to find the relationship between mass and force. he placed four different masses on a table and pulled them using a spring scale. the table shows the different masses used in the experiment and the force required to pull each mass. the student concluded that more force was required to pull heavier objects. what comment would you make regarding his conclusion? a) no clear relation can be observed between mass and force from the data. b) there is a direct proportion between the mass and force listed in the table. c) gravity should have been taken into account while performing the experiment. d) there is an inverse proportion between the mass and force listed in the table.

Part of a control linkage for an airplane consists of a rigid member cb and a flexible cable ab. if a force is applied to the end b of the member and causes it to rotate by θ = 0.5°, determine the normal strain in the cable. originally the cable is unstretched.