A cable-operated clutch is being adjusted. Technician A says that free travel is measured at the clutch pedal and should be between 3/4 and 1 inch (19 to 25 mm). Technician B says that the clutch spin-down time should be less than two seconds. Which technician is correct?

A) Technician A only

B) Technician B only

C) Both technicians

D) Neither technician

A

Technician A only 

Explanation:

On a cable-operated clutch, the adjustment is made at the cable end. The clearance is usually measured either at the operating lever or at the pedal.

To perform efficiently, the clutch  needs the right amount of play in the linkage between the foot pedal and the  clutch operating  lever

Anything less than the correct amount of free play (or clearance ) will result in clutch slip, because the pressure plate will be unable to exert its full pressure on the friction plate .

Failure to cure this fault will quickly lead to a burned-out friction plate, and possibly a ruined pressure plate.

adding a(n) to an electric circuit would increase the magnetic field around a wire;

b. solenoid

a solenoid is a type of electromagnet whose purpose is to generate a controlled magnetic field.

if the purpose of the solenoid is instead to impede changes in the electric current, a solenoid can be more specifically classified as an inductor rather than an electromagnet.

talk back to him about the sport and show him your expertise or leave the room