Physics, 05.05.2020 11:39 garzacon8822

If the cross-sectional area of a wire is decreased while all other factors remain the same, how will the resistance change?
A. It will increase
B. It will decrease.
C. It will go to zero.
D. The cross-sectional area does not affect the resistance.

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 14:10

Amachinist turns the power on to a grinding wheel, at rest, at time t = 0 s. the wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 96 rad/s. the wheel is run at that angular velocity for 40 s and then power is shut off. the wheel slows down uniformly at 1.5 rad/s2 until the wheel stops. in this situation, the time interval of deceleration is closest to:

Answers: 3

Answer

Physics, 22.06.2019 14:40

What is the orbital period of a spacecraft in a low orbit near the surface of mars? the radius of mars is 3.4×106m.

Answers: 2

Answer

Physics, 22.06.2019 19:40

It may seem strange that the selected velocity does not depend on either the mass or the charge of the particle. (for example, would the velocity of a neutral particle be selected by passage through this device? ) the explanation of this is that the mass and the charge control the resolution of the device--particles with the wrong velocity will be accelerated away from the straight line and will not pass through the exit slit. if the acceleration depends strongly on the velocity, then particles with just slightly wrong velocities will feel a substantial transverse acceleration and will not exit the selector. because the acc

Answers: 1

Answer

Physics, 22.06.2019 20:40

Abasketball star covers 2.65 m horizontally in a jump to dunk the ball. his motion through space can be modeled precisely as that of a particle at his center of mass. his center of mass is at elevation 1.02 m when he leaves the floor. it reaches a maximum height of 1.90 m above the floor and is at elevation 0.910 m when he touches down again. (a) determine his time of flight (his "hang time"). (b) determine his horizontal velocity at the instant of takeoff. (c) determine his vertical velocity at the instant of takeoff. (d) determine his takeoff angle. (e) for comparison, determine the hang time of a whitetail deer making a jump with center-of-mass elevations yi = 1.20 m, ymax = 2.45 m, and yf = 0.750 m.

Answers: 1

Answer

You know the right answer?

If the cross-sectional area of a wire is decreased while all other factors remain the same, how will...

Questions