subject
Physics, 05.05.2020 04:18 joshuahagerman1404

You want to manufacture a guitar such that the instrument will be in tune when each of the strings are tightened to the same tension. The middle (D) string on the guitar should have fundamental frequency 146.83 Hz. The highest (E) string should have fundamental frequency 329.63 Hz. If the D string has linear mass density 0.00296kg/m, what should be the mass density of the E string? Assume all the strings are the same length.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 17:30
What is the difference between electrically neutral objects and electrically charged objects
Answers: 2
question
Physics, 21.06.2019 22:30
Under conditions for which the same room temperature is maintained by a heating or cooling system, it is not uncommon for a person to feel chilled in the winter but comfortable in the summer. provide a plausible explanation for this situation (with supporting calculations) by considering a room whose air temperature is maintained at 20â°c throughout the year, while the walls of the room are nominally at 27â°c and 14â°c in the summer and winter, respectively. the exposed surface of a person in the room may be assumed to be at a temperature of 32â°c throughout the year and to have an emissivity of 0.90. the coefficient associated with heat transfer by natural convection between the person and the room air is approximately 2 w/m2 â‹…â‹… k. what is the ratio of the thermal resistance due to convection to the thermal resistance due to radiation in the summer? what is the ratio of thermal resistances in the winter
Answers: 1
question
Physics, 22.06.2019 02:30
Which of the following are properties of mechanical waves? check all that apply ⭕️ particles of the medium move back and fourth, but do not move with the wave. ⭕️ the particles of the medium always move parallel to the wave motion. ⭕️ wave motion begins with a disturbance in the medium. ⭕️ waves transport energy from a source outward, away from the source.
Answers: 2
question
Physics, 22.06.2019 04:50
The position of a crate sliding down a ramp is given by x=(0.05t^3) m, y=(1.7t^2) m, z=(6−0.85t^5/2) m, where t is in seconds. (a) determine the magnitude of the crate's velocity when t = 2 s. (b) determine the magnitude of the crate's acceleration when t = 2 s.
Answers: 2
You know the right answer?
You want to manufacture a guitar such that the instrument will be in tune when each of the strings a...
Questions
question
Mathematics, 19.10.2019 01:40
question
Mathematics, 19.10.2019 01:40
Questions on the website: 13722362