Physics, 05.05.2020 04:35 vonteee2

A radio controlled model car with mass m=4.58 kg starts a race initially from rest at t=0 and accelerates with constant acceleration to a speed of 11.2 m/s in a time of t=6.6 s. What is the average power do the car's batteries have to deliver during the acceleration, and what is the instantaneous power at the end of the time interval? Select one answer for average power (P-ave) and one for the instantaneous power at t=6.6 s (P-final).

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 20:30

3. on your graph, the data points between the black squares are data for elements with atomic numbers 3 through 9. locate these elements on your periodic table. what term or description would you use to identify these elements with respect to the periodic table?

Answers: 2

Answer

Physics, 22.06.2019 02:30

Agas contained within a piston-cylinder assembly undergoes three processes in series: process 12: compression with pv= constant from 1 bar and 1 liter to 4 bar. process 23: constant pressure expansion to 1 liter. process 31: constant volume calculate the pressure and volume at each state, and sketch the processes on a p-vdiagram labeled with pressure and volume values at each numbered stat

Answers: 2

Answer

Physics, 22.06.2019 10:50

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

Answer

Physics, 22.06.2019 12:10

Consider a one meter long horizontal pipe with a constant 100 cm^2 cross sectional area. water flows rightward into the pipe at x = 0 with flow velocity 02m/sec at every point within the pipe intake area. at x=1, the rightward flow rate is 0.192 m/sec. assume the water is a conserved quantity in the pipe, so there must be a leak (a sink) somewhere in the pipe. 1. compute net volumetric flow of the source if the system to be in equilibrium. 2. now assume the pipe in the problem has no leaks. compute the net volumetric rate of change for the system.

Answers: 3

Answer

You know the right answer?

A radio controlled model car with mass m=4.58 kg starts a race initially from rest at t=0 and accele...

Questions