Physics, 19.10.2019 17:30 xxtonixwilsonxx

Which statements about acceleration are true? check all that apply. a. the si units of acceleration are m/s2. b. for acceleration, you must have a number, a unit, and a direction. c. to calculate acceleration, divide the change in speed by the change in time. d. the symbol for acceleration is .

Answers: 2

Show answers

Answers

Answer from: noeminm105

The first thing you should know is that acceleration is a vector, therefore, it has magnitude, and direction.

By definition, we have that the vector acceleration is given by:

$a = \frac{dv}{dt}\\$

Where,

dv/dt: derived from the velocity vector with respect to time,

Therefore, the units of the vector acceleration are:

$a = \frac{\frac{m}{s}}{s}\\$

$a = \frac{m}{s^2}$

The symbol of acceleration is:

$a^{-}$

The statements about acceleration that are true are:

a. the si units of acceleration are m/s2.

b. for acceleration, you must have a number, a unit, and a direction.

d. the symbol for acceleration is (True, only if the symbol is the same as above)

Which statements about acceleration are true? check all that apply. a. the si units of acceleration

Answer from: pedroramirezr2

A is True:

The formula for acceleration is:

$Acceleration = \frac{Vf-Vi}{t}$
$Acceleration = \frac{Xm/s-Xm/s}{s} = Xm/s^{2}$

Because the unit of velocity is m/s and the unit of time is second this is what happened:

$\frac{m}{s}$ ÷ $\frac{s}{1}$

$\frac{m}{s}$ ÷X $\frac{1}{s}$ = $\frac{m}{s^{2}}$

B is True:

Acceleration is a vector quantity, so that means it should have both magnitude and direction. When given an acceleration, the sign usually indicates the direction. A negative value is a sign that it is decelerating and not accelerating.

D could be true only if:

Your question is actually broken so we do not know the symbol you are showing. But in general, the symbol of acceleration is a letter "a" with an arrow on top. You can see in the picture attached to see the symbol I am referring to.

C is not true because acceleration is the change in VELOCITY over time. Velocity and speed are different.

Answer from: Quest

c.is a substance that requires a small amount of energy per gram to raise its temperature; has strong cohesive forces between molecules.

explanation:

a colorless, transparent, odorless liquid that forms the seas, lakes, rivers, and rain and is the basis of the fluids of living organisms.

Answer from: Quest

as we probably am aware that our atmosphere or air have various levels, each level has different gasses, and each gas has another porousness. at the point when the light originates from lower porousness to higher penetrability, it alters its course. with the goal that implies that when the light originates from the moon to the earth, it alters it's course a lot more occasions. it essentially implies that the state of the light piece of the moon is changed on the earth.

not copied too! hope this !

joke:

h o h o hope you have a merry christmas!

Another question on Physics

Physics, 21.06.2019 16:30

You throw a baseball directly upward at time t = 0 at an initial speed of 12.3 m/s. what is the maximum height the ball reaches above where it leaves your hand? at what times does the ball pass through half the maximum height? ignore air resistance and take g = 9.80 m/s2.

Answers: 1

Answer

Physics, 21.06.2019 23:30

A175 g lump of molten lead at its melting point (327 c) is placed into 55.0 g of water at 20.0 c. the specific heat of lead is 130.j/kg c and the hf of lead is 20,400 j/kg. when the lead and the water have reached equilibrium, what is the temperature of the mixture?

Answers: 3

Answer

Physics, 22.06.2019 05:10

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Answers: 3

Answer

Physics, 22.06.2019 07:50

Calculate the ratio of h+ ions to oh– ions at a ph = 6. find the concentration of h+ ions to oh– ions listed in table b of your student guide. then divide the h+ concentration by the oh– concentration. record this calculated ratio in table a of your student guide. compare your approximated and calculated ratios of h+ ions to oh– ions at a ph = 6. are they the same? why or why not? record your explanation in table a. what is the concentration of h+ ions at a ph = 6? mol/l what is the concentration of oh– ions at a ph = 6? mol/l what is the ratio of h+ ions to oh– ions at a ph = 6? : 1

Answers: 1

Answer

You know the right answer?

Which statements about acceleration are true? check all that apply. a. the si units of acceleration...

Questions