Two uniform thin plates of mass m = 2 kg each are welded to a shaft of negligible mass. Each plate is square plate of length b = 0.4 m and width b = 0.4 m. Find the inertia tensor based on the given axes. Then, use MATLAB to find the principal moments of inertia and their directional cosines. Use the data to draw the principal axes. Include a printout of your MATLAB code and output

You are a sales representative for a company that makes a new alternate fuel for vehicles. you have prepared a presentation for the environmental engineers to sell your new product. what question do you expect the audience to ask regarding whether the new fuel will cause less damage to the environment? a. do we have to change any parts of the vehicle to use this alternate fuel? b. will the vehicles get better fuel mileage with the alternate fuel? c. how much greenhouse gas does your fuel produce compared with current fuel sources? d. is the alternate fuel more expensive than fossil fuel?

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.