An aluminum "12 gauge" wire has a diameter d of 0.205 centimeters. The resistivity ρ of aluminum is 2.75×10−8 ohm-meters. The electric field in the wire changes with time as E(t)=0.0004t2−0.0001t+0.0004 newtons per coulomb, where time is measured in seconds. Find the current I through the conductor at time 5.0 seconds.

I = 4.75 A

Explanation:

To find the current in the wire you use the following relation:

     (1)

E: electric field E(t)=0.0004t2−0.0001t+0.0004

ρ: resistivity of the material = 2.75×10−8 ohm-meters

J: current density

The current density is also given by:

       (2)

I: current

A: cross area of the wire = π(d/2)^2

d: diameter of the wire = 0.205 cm = 0.00205 m

You replace the equation (2) into the equation (1), and you solve for the current I:

Next, you replace for all variables:

hence, the current in the wire is 4.75A

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this

it's when something is going so fast it makes a loud noise, breaking the sound barrier, for example: a jet makes a loud noise, not only cause of the jet but because they reached a point where they went so fast that you can year the noise from various parts, kinda like a police car, lets say the car was going   so fast that you hear the siren of the cop car right next to you, but the car is probably a mile a way, it's cos the siren was next to you a few seconds if you understand me