Physics, 27.06.2020 23:01 hailey5129

In an old house, the heating system uses radiators, which are hollow metal devices through which hot water or steam circulates. In one room the radiator has a dark color (emissitivity= 0.75). It has a temperature of 62∘C. The new owner of the house paints the radiator a lighter color (emissivity = 0.50). Assuming that it emits the same radiant power as it did before being painted, what is the temperature (in degrees Celsius) of the newly painted radiator?

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 15:00

If this plastic cup is heated to its melting point, what will eventually happen to all the particles in the plastic? a. the particles will begin to move enough that they slide past each other. b. bonds will form and the liquid will become a solid. c. the spaces between the particles will get smaller. d. the particles will change state and become a crystalline solid.

Answers: 2

Answer

Physics, 21.06.2019 15:10

Alightning strike consists of charge moving from a cloud to the ground . in one particular case, the electrons in a lightning strike are confined to travel within a radius of 1.5 m and to move at a speed of 5.0 x 10 m/s. if the density of electrons in the strike is 10'15 electrons/m what current is carried by the lightning ?

Answers: 1

Answer

Physics, 22.06.2019 00:30

Next a skier is pulled by a tow rope up a frictionless ski slope that makes an angle of 15 with the horizontal. the rope moves parallel to the slope with a constant speed of 0.69 m/s. the force of the rope does 800 3 of work on the skier as the skier moves a distance of 8.4 m up the incline. (a) if the rope moved with a constant speed of 2.2 m/s how much work would the force of the rope do on the skier as the skler moved a distance of 8.4 m up the incline? at what rate is the force of the rope doing work on the skier when the rope moves with a speed of (b) 0.69 m/s and (c) 2.2 m/s?

Answers: 1

Answer

Physics, 22.06.2019 05:10

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Answers: 3

Answer

You know the right answer?

In an old house, the heating system uses radiators, which are hollow metal devices through which hot...

Questions