Physics, 24.07.2020 21:01 sarahalexa19

Irrigation channels that require regular flow monitoring are often equipped with electromagnetic flowmeters in which the magnetic field is produced by horizontal coils embedded in the bottom of the channel. A particular coil has 100 turns and a diameter of 6.0 mm. When it's time for a measurement, a 3.5 AA current is turned on. The large diameter of the coil means that the field in the water flowing directly above the center of the coil is approximately equal to the field in the center of the coil. The field is directed downward and the water is flowing east. The water is flowing above the center of the coil at 1.5 m/s. Required:
a. What is the magnitude of the field at the center of the coil?
b. What is the direction of the force on a positive ion in the water above the center of the coil?

1. The force points west.
2. The force points north.
3. The force points south.
4. The force points east.

c. What is the magnitude of the force on an ion with a charge +e?

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 18:00

Alivestock company reports that the mean weight of a group of young steers is 1100 pounds with a standard deviation of 93 pounds. based on the model n(1100,93) for the weights of steers, what percent of steers weigh a) over 1050 pounds? b) under 1300 pounds? c) between 1150 and 1250 pounds?

Answers: 1

Answer

Physics, 22.06.2019 12:10

Consider a one meter long horizontal pipe with a constant 100 cm^2 cross sectional area. water flows rightward into the pipe at x = 0 with flow velocity 02m/sec at every point within the pipe intake area. at x=1, the rightward flow rate is 0.192 m/sec. assume the water is a conserved quantity in the pipe, so there must be a leak (a sink) somewhere in the pipe. 1. compute net volumetric flow of the source if the system to be in equilibrium. 2. now assume the pipe in the problem has no leaks. compute the net volumetric rate of change for the system.

Answers: 3

Answer

Physics, 22.06.2019 19:30

The ability to make things happen is also called a. heat b. force c. matter d. energy

Answers: 2

Answer

Physics, 23.06.2019 02:40

Check the following equation for dimensional homogeneity: ⅆ mv=∫t1t2(f⁢cosθ)ⅆt where m is mass, v is velocity, f is force, θ is an angle, and t is time. check that each term in the equation has the following dimensions: [malbec] where you are to choose the coefficients a, b, c.

Answers: 2

Answer

You know the right answer?

Irrigation channels that require regular flow monitoring are often equipped with electromagnetic flo...

Questions

SAT, 14.12.2021 03:30

Telegraphic speech is most closely associated with the stage of laguage...