You need to design a clock that will oscillate at 10 MHz and will spend 75% of each cycle in the high state. You will be using a 500 pF capacitor. What values do you need to specify for R1 and R2

Hello your question has some missing parts and the required diagram attached below is the missing part and the diagram

Digital circuits require actions to take place at precise times, so they are controlled by a clock that generates a steady sequence of rectangular voltage pulses. One of the most widely

used integrated circuits for creating clock pulses is called a 555 timer.  shows how the timer’s output pulses, oscillating between 0 V and 5 V, are controlled with two resistors and a capacitor. The circuit manufacturer tells users that TH, the time the clock output spends in the high (5V) state, is TH =(R1 + R2)*C*ln(2). Similarly, the time spent in the low (0 V) state is TL = R2*C*ln(2). Design a clock that will oscillate at 10 MHz and will spend 75% of each cycle in the high state. You will be using a 500 pF capacitor. What values do you need to specify for R1 and R2?

ANSWER : R1 = 144.3Ω,   R2 =  72.2 Ω

Explanation:

Frequency = 10 MHz

Time period = 1 / F =  0.1 u s

Duty cycle = 75% = 0.75

Duty cycle can be represented as :   Ton / T

Also: Ton = Th = 0.75 * 0.1 u s  = 75 n s

TL = T - Th = 100 ns - 75 n s = 25 n s

To find the value of R2 we use the equation for  time spent in the low (0 V) state

TL = R2*C*ln(2)

hence R2 = TL / ( C * In 2 )

c = 500 pF

Hence R2 = 25 / ( 500 pF * 0.693 )  = 72.2 Ω

To find the value of R1 we use the equation for the time the clock output spends in the high (5V) state,

Th = (R1 + R2)*C*ln(2)

  from the equation make R1 the subject of the formula

R1 =  (Th - ( R2 * C * In2 )) / (C * In 2)

R1 = ( 75 ns - ( 72.2 * 500 pF * 0.693)) / ( 500 pF * 0.693 )

R1 = ( 75 ns  - ( 25 ns ) / 500 pf * 0.693

     = 144.3Ω

carbon is found in all living things. carbon atoms move constantly through

living organisms, the oceans, the atmosphere, and the earth’s crust in what is

known as the carbon cycle. the directions taken by carbon atoms through this

cycle are very complicated and can take millions of years to make a full circle.

all animals, from humans to the dinosaurs are part of the carbon cycle. when

animals eat food, they get carbon in the form of carbohydrates and proteins.

in animals, oxygen combines with food in the cells to produce energy for daily

activity and then gives off carbon. the carbon combines with oxygen to form

carbon dioxide (co2) and is released back into the atmosphere as a waste

product when animals breathe and exhale.

from 145-65 million years ago, earth was much

hotter than today and covered with dense,

tropical swamp forests. the trees and other

plants were immense and

provided an endless supply of

food for the giant animals that

roamed the land. somewhere in

the air above one of these

forests, a lone carbon atom has joined

up with two oxygen atoms to form a molecule of co2.

the co2 molecule was sucked into the tiny holes (stomata) on the leaf of a

fern plant and joined with sunlight, chlorophyll and water to make food and

energy in the plant’s cells through photosynthesis. the oxygen (o2) from the

co2 molecule was sent back into the atmosphere; the carbon atom (c) was

detached and used to make a molecule of sugar.

if that carbon atom had been eaten instead, a totally

different situation would have developed. let’s say

that a giant plant-eating dinosaur (herbivore) ate the

fern for breakfast, and swallowed the carbon in the

fern in the form of carbohydrates and proteins. in

the process of respiration, oxygen combined with

the carbohydrates and proteins in the dinosaur’s cells

to provide energy for its daily activity.  

the answer for apex is the lowest