Three ideal polarizing filters are stacked, with the polarizing axis of the second and third filters at 29.0and 58.0, respectively, to that of the first. If unpolarized light is incident on the stack, the light has intensity 110 after it passes through the stack. If the incident intensity is kept constant, what is the intensity of the light after it has passed through the stack if the second polarizer is removed?

     I₂ = 143.79

Explanation:

To solve this problem, work them in two parts. A first one where we look for the intensity of the incident light in the set and a second one where we silence the light transmuted by the other set,

Let's start with the set of three curling irons

Beautiful light falls on the first polarized is not polarized, therefore only half the radiation passes

              I₁ = I₀ / 2

this light reaches the second polarized and must comply with the Mule law

             I₂ = I₁ cos² tea

The angle between the first polarized and the second is Tea = 29.0º

             I₂ = I / 2 cos² 29

The light that comes out of the third polarized is

              I₃ = I₂ cos² tea

the angle between the third - second polarizer is

             tea = 58-29

             tea = 29th

               I3 = (I₀ / 2 cos² 29) cos² 29

indicate the output intensity

                I3 = 110

we clear

              I₀ = 2I3 / cos4 29

              I₀ = 2 110 / cos4 29

              I₀ = 375.96 W / cm²

Now we have the incident intensity in the new set of three polarizers

back to the for the first polarizer

                 I₁ = I₀ / 2

when passing the second polarizer

                     I₂ = I1 cos² 29

                    I2 = IO /2 cos²29

let's calculate

                I₂ = 375.96 / 2 cos² 29

               I₂ = 143.79

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water