A student submits the following work on reference frames and centripetal force, but she has made a few mistakes. Select all sentences that contain mistakes. All non-inertial reference frames exhibit “fictitious forces.” One of these fictitious forces is the centripetal force. For example, consider a car moving in a straight line. When the car turns to the right, the passengers experience a “force” to the right. However, there is no actual force applied. The passenger is merely continuing in a straight direction. When the car is turning, the reference frame of the car is an inertial reference frame. Hence, the passenger experiences this fictitious force, even though there is no actual force there.

The inside surface of a cylindrical-shaped cave of inner diameter 1.0 m is continuously covered with a very thin layer of water. the cave is very long and it is open on both ends. the water on the cave surface is at a constant temperature of 15.5 °c. the cave is constantly exposed to wind such that 15.5 °c air flows through the cave at 4.5 m/s. the kinematic viscosity of the air is 14.66 x 10-6 m2/s and the molecular diffusion coefficient of water vapor in the air is 0.239 x 10-4 m2/s. because the cave diameter is so large, the flow of wind down the length of the cave, in the x direction, can be treated like it is external flow and the cave surface can be approximated as flat where appropriate. calculate the x value, in a) the transition to turbulent flow occurs at rex meters, where the air flow transitions from laminar to turbulent along the inside surface of the cave b) calculate the x value, in meters, where the bulk steady state concentration of water vapor in the air flowing in the cave is 10% of the saturation concentration. assume the air at the surface of the water layer is 100% saturated with water vapor. assume the wind entering the cave contained no moisture before it entered the cave. take into account the transition from laminar to turbulent flow when solving part b