Using the same cost and time estimates, consider any trade-offs that SciTech may have to make to complete the project. Ideally, the process of technological design should be cost-effective and time-effective. However, sometimes this is simply not possible and trade-offs are necessary. Explain the trade-offs SciTech may have to make to complete the project.

The four giant gas points that are made primarily of lightweight elements are

Carbon is allowed to diffuse through a steel plate 15 mm thick. the concentrations of carbon at the two faces are 0.65 and 0.30 kg c/m^3 fe, which are maintained constant. if the preexponential and activation energy are 6.2 x 10-7 m2 /s and 80,000 j/mol, respectively, compute the temperature at which the diffusion flux is 1.43 x 10^-9 kg/m^2 -s.

Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.