Physics, 02.09.2020 21:01 magicgeek4980

1. How do energy and matter recycle in a closed-loop system?

Answers: 2

Show answers

Answers

Answer from: AliMe52

In a closed system loop, the matter has been recycled to provide raw material and form new products. The energy formed by the product has been recycled by being used by the raw materials for the formation of new products.

The closed system loop can be defined as the system in which the products and energy has been recycled continuously to form more products. The energy has been formed in the closed system loop, that can be utilized by the raw materials for the production of energy.

The products formed after reaching the equilibrium of the formation, and dissociation reaches the point, and starts to dissociate to provide the raw material to the system.

Thus, in a closed system loop, the matter has been recycled to provide raw material and form new products. The energy formed by the product has been recycled by being used by the raw materials for the formation of new products.

For more information about a closed system loop, refer to the link:

link

Answer from: erica11223344

In a closed-loop system, matter is used to generate energy, and the energy generated is used to produce matter, and the cycle goes on without end.

Explanation:

A closed-loop system is one in which materials or energy is recycled without end through a production cycle. This means that a raw material is used to produce a finished product, and the finished product at the end of its use cycle is converted back and used as a raw material to produce more of it again. Energy and matter can also be cycled in the same way in an energy and matter closed-loop system, converting matter to energy, and the energy is put back into the production of more of the matter.

Answer from: Quest

b mirrors submit a iisner? e. for which optical devices does d sometimes have a positive value? o a a and b o b. a and c o c. b and d 0 d. b and cb

Answer from: Quest

Wish i knew this to !

Another question on Physics

Physics, 21.06.2019 19:30

11. you want to calculate the displacement of an object thrown over a bridge. using -10 m/s2 for acceleration due to gravity, what would be the total displacement of the object if it took 8 seconds before hitting the water?

Answers: 1

Answer

Physics, 22.06.2019 11:20

Suppose a diode consists of a cylindrical cathode with a radius of 6.200×10^−2 cm , mounted coaxially within a cylindrical anode with a radius of 0.5580 cm . the potential difference between the anode and cathode is 260 v . an electron leaves the surface of the cathode with zero initial speed (v initial=0). find its speed vfinal when it strikes the anode.

Answers: 1

Answer

Physics, 23.06.2019 00:30

Why does the equilibrium position of the spring change when a mass is added to the spring? will the mass oscillate around the new equilibrium position of the spring or the previous position without a mass attached to the spring? if the equilibrium position of the spring changes by 20 cm (assuming no initial mass) when a mass is added to the spring with constant 4.9 kg/s^2, what is the mass of the object attached to the spring?

Answers: 2

Answer

Physics, 23.06.2019 10:30

Can someone answer my last question i posted? on my last post? my hw is due tomorrow and i’m confused.