subject
Physics, 28.09.2020 09:01 mine9226

Mr. Turner is driving through downtown Houston at 35 MPH (15.56 m/s). This is above the posted speed limit and there are cars parked alongside the curb in the lane next to Mr. Turner. Of course, a large delivery truck ahead looks like it is parked and driverless, but the driver's door swings open into the lane ahead of Mr. Turner. Mr. Turner's reaction time is 3/4th's of a second and the stopping distance at his speed is 1.7 meters. The driver exiting the delivery truck is 13.3 meters ahead. Can Mr. Turner stop in time? What is the vehicle's acceleration when the brakes are applied? How far will the vehicle travel before Mr. Turner engages the brake?

(I need someone to explain this to me)

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 14:10
Amachinist turns the power on to a grinding wheel, at rest, at time t = 0 s. the wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 96 rad/s. the wheel is run at that angular velocity for 40 s and then power is shut off. the wheel slows down uniformly at 1.5 rad/s2 until the wheel stops. in this situation, the time interval of deceleration is closest to:
Answers: 3
question
Physics, 22.06.2019 15:40
Apotter's wheel moves uniformly from rest to an angular speed of 0.20 rev/s in 32.0 s. (a) find its angular acceleration in radians per second per second. rad/s2 (b) would doubling the angular acceleration during the given period have doubled final angular speed?
Answers: 1
question
Physics, 22.06.2019 18:50
8.29 two streams containing pyridine and acetic acid at 25°c are mixed and fed into a heat exchanger. due to the heat-of-mixing effect, it is desired to reduce the temperature after mixing to 25°c using a stream of chilled ethylene glycol as indicated in the diagram. calculate the mass flow rate of ethylene glycol needed. the heat capacity of ethylene glycol at these conditions is approximately 2.8 kj/(kg k), and the enthalpy change of mixing (δmixh) is given below.
Answers: 3
question
Physics, 22.06.2019 19:10
3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0
Answers: 2
You know the right answer?
Mr. Turner is driving through downtown Houston at 35 MPH (15.56 m/s). This is above the posted speed...
Questions
question
Chemistry, 15.09.2021 17:50
question
English, 15.09.2021 17:50
question
English, 15.09.2021 17:50
question
Engineering, 15.09.2021 17:50
question
Mathematics, 15.09.2021 17:50
question
Biology, 15.09.2021 17:50
Questions on the website: 13722362