Physics, 05.10.2020 15:01 mayhy100

Write a hypothesis for Part II of the lab, which is about the type of material an object is made of, and its ability to absorb or release thermal energy. Use the format of "if . . . then . . . because . . .” and be sure to answer this part of the lesson question: "How does the type of material affect thermal energy transfer?

Answers: 3

Show answers

Answers

Answer from: Quest

Divide 108.2 x 10^6 into 1.5 x 10 and the result will be in au (astronomical units)

Answer from: Quest

Uncle grandma

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

Answer from: Quest

from wikipedia

Another question on Physics

Physics, 22.06.2019 05:30

Acombination reaction is when two or more combine to form one product. a decomposition reaction is when a substance breaks down into two or more simpler substances in a chemical reaction.

Answers: 1

Answer

Physics, 22.06.2019 10:50

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

Answer

Physics, 22.06.2019 12:30

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.

Answers: 1

Answer

Physics, 22.06.2019 14:30

You can decrease the resistance of a length of wire by

Answers: 2

Answer

You know the right answer?

Write a hypothesis for Part II of the lab, which is about the type of material an object is made of,...

Questions