Which of the following is a unit of volume in the English system of measurement? (4 points) Meters

Gallons

Liters per cubic gram

Kilograms per cubic centimeter

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

From the perspective of an employee that effective channeling of work related information and concerns

Suppose that a mass of 2 kg is attached a spring whose spring constant is 50. the system is damped such that b = 12 . the mass is set in motion with an initial velocity of -8 m/s at a position 0 meters from equilibrium. set up and solve a differential equation that models this motion. write your solution in the form a cos ( ω t − α ) where α is a positive number. use your solution to fill in the information below: what is the amplitude of the motion? what is the value of ω ? what is the phase shift?