4. A boat uses its motor to increase its speed from 5 m/s to 7 m/s. If the boat has a mass of 250 kg, what was the impulse applied by the motor?

Me ! a 2 µc charge q1 and a 2 µc charge q2 are 0.3 m from the x-axis. a 4 µc charge q3 is 0.4 m from the y-axis. the distances d13 and d23 are 0.5 m. find the magnitude and direction of the resulting vector r. round your answer to the nearest tenth.

Ammonia enters the expansion valve of a refrigeration system at a pressure of 10 bar and a temperature of 18oc and exits at 6.0 bar. the refrigerant undergoes a throttling process. determine the temperature, in oc, and the quality of the refrigerant at the exit of the expansion valve.

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.