Water flows into a swimming pool at the rate of 5.25 gal/min.
If the pool dimensions are 33.8 ft wide, 40 ft
long and 11.1 ft deep, how long does it take to
fill the pool? (1 gallon = 231 cubic inches)
Answer in units of min.

How does the space charge width change with forward and reverse bias? also, calculate the space charge width for a reverse bias of 4v on a silicon pn junction at t = 300k and doping concentrations of na = 5x1015cm-3 , nd = 5x 1016 cm-3 .

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

The ratio of lift to drag l/d for a wing or airfoil is an important aerodynamic parameter, indeed, it is a direct measure of the aerodynamic efficiency of the wing. if a wing is pitched through a range of angle of attack, l/d first increases, then goes through a maximum, and then decreases. consider an infinite wing with an naca 2412 airfoil. estimate the maximum value of l/d. assume that the reynolds number is 9x10^6.