A cube with 2.0cm sides is made of material with a bulk modulus of 4.7x105 N/m2. When it is subjected
to a pressure o 2.0 x105 Pa the length
its any of its sides is :
(1) 0.85cm
(2) 1.15cm
(3) 1.66cm
(4) 2.0cm

In a closed system, the total energy prior to an energy transformation is the total energy after. a. equal to b. unrelated to c. greater than d. less than

Assuming weightless pulleys and 100% efficiency, what is the minimum input force required to lift a 120 n weight using a single fixed pulley?

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?