A long thin rod of length 2L rotates with a constant angular acceleration of 8.0 rad/s2 about an axis that is perpendicular to the rod and passes through its center. What is the ratio of the tangential acceleration of a point on the end of the rod to that of a point a distance L/2 from the end of the rod

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

What is required for an electric charge to flow through a wire? zero resistance in the wire a balance of electric potential high resistance in the wire a difference in electric potential

Consider a system to be two train cars traveling toward each other. what is the total momentum of the system before the train cars collide?   kg • what must the total momentum of the system be after the train cars collide?   kg •