For a solar eclipse to occur which of the following alignments must be necessary

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Asled is being held at rest on a slope that makes an angle θ with the horizontal. after the sled is released, it slidesa distance d1 down the slope and then covers the distance d2 alongthe horizontal terrain before stopping. find the coefficient ofkinetic friction μk between the sled and the ground, assumingthat it is constant throughout the trip. find the coefficient of kinetic frictionμk. express your answer in terms of someor all of the variables d1, d2, and θ.

Isobars are lines of constant or equal pressure on a weather map. they can be used to find areas of low or high pressure over a broad area, and they can tell us how intense the system may be. on weather maps, you may have noticed areas that have a large l or h over a region with lines circling around them. the l stands for low pressure and h stands for high pressure. the lines circling them are isobars. check out the pressure system and isobars over georgia and florida. what is the present weather in this area ? a) clear and sunny b) cold and cloudy c) changing weather d) lots of precipitation