subject
Physics, 06.11.2020 03:40 kaylakk5

Drag the tiles to the boxes to form correct pairs. As you’ve learned, different objects in space emit different wavelengths of electromagnetic radiation. Use the chart to match each of the following wavelengths to the correct region of the electromagnetic spectrum.

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 02:50
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
question
Physics, 22.06.2019 20:50
Suppose that a mass of 2 kg is attached a spring whose spring constant is 50. the system is damped such that b = 12 . the mass is set in motion with an initial velocity of -8 m/s at a position 0 meters from equilibrium. set up and solve a differential equation that models this motion. write your solution in the form a cos ( ω t − α ) where α is a positive number. use your solution to fill in the information below: what is the amplitude of the motion? what is the value of ω ? what is the phase shift?
Answers: 1
question
Physics, 22.06.2019 23:10
An ascending elevator, hanging from a cable, is coming to a stop. part a part complete identify all forces acting on the elevator from the list below. select all that apply. select all that apply. kinetic friction normal force tension weight static friction submitprevious answers correct part b draw a free-body diagram of the object. draw the vectors starting at the black dot. the location and orientation of the vectors will be graded. the exact length of your vectors will not be graded but the relative length of one to the other will be graded.
Answers: 3
question
Physics, 23.06.2019 09:00
Momentum lab this lab uses a phet simulation. navigate to the phet momentum simulation. if you don’t see the image below when you click on the link, then you need to either enable adobe flash (click on the puzzle piece on your screen) or you need to install adobe flash (this is a free program). change the vectors to be momentum vectors only. they are yellow. make the mass of both balls the same. hit play and notice what happens to the momentum vectors before and after the collision. you might want to play the sim multiple times. click on restart or return balls to start over. to see numbers, check the show values box (inside the green box). red’s momentum vector before the collision is green’s momentum vector after the collision. question 1 options: shorter than longer than equal to question 2 (1 point) saved since green bounces off red, this must be an collision. question 2 options: explosion inelastic elastic question 3 (1 point) red transfers of its momentum to green during the collision. question 3 options: little all most none question 4 (4 points) why does red transfer all its momentum to green? back up your answer with information from the simulation. write at least 2 sentences.
Answers: 1
You know the right answer?
Drag the tiles to the boxes to form correct pairs. As you’ve learned, different objects in space em...
Questions
question
Mathematics, 27.09.2019 08:10
question
History, 27.09.2019 08:10
question
Chemistry, 27.09.2019 08:10
question
Mathematics, 27.09.2019 08:10
Questions on the website: 13722361