Tanya randhawa is standing on top of a train that is traveling at 7 km/sec. The train hits a cow and comes to a complete stop. There is no gravity or friction in Tanyas world. According to newton's first law what happens to tanya

Since there is no gravity or friction in Tanya's world, according to Newton's first law she will keep moving at a constant speed.

Explanation:

Newton's First Law, or also called the Law of Inertia, postulates that every body that is not subjected to any interaction (free or isolated body) remains at rest or moves with constant speed. In other words, it is not possible for a body to change its initial state (whether of rest or motion) unless one or more forces intervene.

In this law then the net force (Σ F) applied on a body is equal to zero and explains that to modify the state of motion of a body it is necessary to act on it.

Tanya randhawa is standing on top of a train traveling at 7 km / sec and the train collides with a cow and comes to a complete stop. Since there is no gravity or friction in Tanya's world, according to Newton's first law she will keep moving at a constant speed.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

prolly a beacuse the momentuem the car has increases while going down hill