If a car manufacturer reduced the mass of a new car model, so that it took a force of 4000 N to accelerate towards the barrier at 4 m/s2, what would be the mass of
the new car?

Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.

Figure 9 on page 362 shows various motions of balls. the curved path followed by the yellow ball in b in picture b is result of a) inertia b) centripetal motion c) gravity and horizontal velocity d) linear motion

What is the average speed of a car that travels 40 mph for 1 hour and 60 mph in another hour?