A bullet of mass 10 g strikes a ballistic pendulum of mass 2.0 . The center of mass of the pendulum rises a vertical distance of 12 Assuming that the bullet remains embedded in the pendulum, calculate the bullet's initial speed.

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?

On a horizontal frictionless surface, a small block with mass 0.200 kg has a collision with a block of mass 0.400 kg. immediately after the collision, the 0.200 kg block is moving at 12.0 m/s in the direction 30° north of east and the 0.400 kg block is moving at 11.2 m/s in the direction 53.1° south of east. use coordinates where the +x-axis is east and the +y-axis is north.(a) what is the total kinetic energy of the two blocks after the collision (in ) what is the x-component of the total momentum of the two blocks after the collision? (indicate the direction with the sign of your ) what is the y-component of the total momentum of the two blocks after the collision? (indicate the direction with the sign of your answer.)

The illuminance of a surface varies inversely with the square of its distance from the light source. if the illuminance of a surface is 120 lumens per square meter when its distance from a certain light source is 6 meters, by how many meters should the distance of the surface from the source be increased to reduce its illuminance to 30 lumens per square meter?