An attractive force of 7.2 n occurs between two point charges that are 0.10 m apart. if one charge is -4.0 µc, what is the other charge? (µc = 1.0 × 10^-6 c) a. -4.0 µc b. -2.0 µc c. +2.0 µc d. +4.0 µc

Space-time metric ds2= -dt2+at2dx2+bt2dy2+ct2dz2 (a)how does the area of a rectangle with vertices at ( x=0, y=0, z=0 ), (1,0,0 ), ( 0,1,0 ) and (1,1,0 ) changes with time? (b) if a photon moving in the x direction starts from the origin at t=1, when does it reach x=l? (ds=0 for the trajectory of a photon.) (c) the proper time for a particle is defined by cd=ds. what is the proper time for a particle to move along the trajectory ( x(t)=t, y(t)=0, z(t)=0 ) from t=0 to 1 ? what is the condition on the parameter a so that the velocity of the particle never exceeds the speed of light ?

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

What tightening torque should be used for a hexagonal head screw (not split-bolt) on a 250 kcmil conductor?