Physics, 17.12.2020 21:10 maleyjustinr

The earth exerts a gravitational force of 3.5 N on an object. What is the mass of the object in kg? Show your work.

Answers: 3

Show answers

Answers

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

Answer from: Quest

pythagoras' theorem

square root (-5^2+9^2)

square root (25+81)

square root (106)

angle is tan^-1(9/5)

neg x, pos y

Answer from: Quest

W= fd
where f is an applied force and d is the distance over which it is applied. when a parachuting skydiver is at constant velocity, he is experiencing "terminal velocity", the point at which his acceleration down is canceled out by air resistance. that means that the resisting force of the air is equal to his weight, but in the opposite direction. with this, we can solve for the work done by the force.
w = fd
w = (92.0)(9.81 m/s^2) (325)
w= 2.93 x 10^5 j
the value for work in this case is positive because it is pushing up on the skydiver, who has a downward force of gravity.
therefore the answer is 2.93 x 10^5 j

Answer from: Quest

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

Another question on Physics

Physics, 21.06.2019 22:30

The law of conservation of energy states that energy cannot be created or , energy can be from one substance to another. the first blank is ' destroyed ' and for the second blank is ' transferred '

Answers: 1

Answer

Physics, 22.06.2019 02:30

If a refrigerator is a heat pump that follows the first law of thermodynamics, how much heat was removed from food inside of the refrigerator if it released 380j of energy to the room?

Answers: 1

Answer

Physics, 22.06.2019 14:40

You throw a small rock straight up from the edge of a highway bridge that crosses a river. the rock passes you on its way down, 7.00 s after it was thrown. what is the speed of the rock just before it reaches the water 28.0 m below the point where the rock left your hand? ignore air resistance.

Answers: 2

Answer

Physics, 22.06.2019 16:40

Which are true about beta reactions? there will be more than one answer. a. it has no change b. it doesn't change the mass of the number c. it has a mass of 0.0005 atoms d. it causes transmutation.

Answers: 3

Answer

You know the right answer?

The earth exerts a gravitational force of 3.5 N on an object. What is the mass of the object in kg?...

Questions