B. The coefficient of friction between the tires and the road is 0.850 and the mass of the car is 1.35x10' kg. Draw the free body diagram of this situation and determine the applied force
that caused the acceleration from part a. (2 law: Fnet-ma)
Given:
u
בנו
Samt
g=9.8 m/s^2
am
(from part a)
Unknown:
Fapp = ?
Equation:
Fnet=ma
Fapp- umg=ma
Solution:

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Una carga puntual de 3 x 10-6 c se coloca a 12 cm de una segunda carga puntual de - 1,5 x 10-6 c. calcular la magnitud fuerza eléctrica entre las cargas

1700 j of energy is lost from 0.14 kg object , the temperature decreases from 50°c to 45°c what is the specific heat of this object, amd what is the material ?