Acar traveling west in a straight line on a highway decreases its speed from 30 meters per second to 23 meters per second in 2 seconds. the car's average acceleration during this time interval is

Follow these directions and answer the questions. 1. shine a pencil-thin beam of light on a mirror perpendicular to its surface. (if you don't have a laser light as suggested in the video, you can make a narrow beam from a flashlight by making a cone from black construction paper and taping it over the face of the flashlight.) how does the light reflect? how does the relationship of incident to reflected ray relate to the reflection of water waves moving perpendicular to a barrier? 2. shine a pencil-thin beam of light on a mirror standing on a sheet of paper on the table (or floor) so that you can mark the incident ray and reflected ray. (you can support the mirror from the back by taping it to a wooden block.) 3. mark a line on the paper representing the reflective surface. (the reflective surface of a mirror is usually the back edge.) 4. draw a dashed line perpendicular to the mirror surface at a point where the incident and reflected ray meet. this perpendicular is called a normal to the surface. 5. measure the angles between the rays and the normal. the angle of incidence is the angle formed by the incident ray and the normal to the surface. the angle formed by the reflected ray and normal is called the angle of reflection (r). what is the angle of incidence? what is the angle of reflection? 6. repeat for several different angles. (see report sheet for details.) what appears to be the relationship between the angle of incidence and angle of reflection? in science 1204, what was the relationship for these two angles made by the reflection of waves in a ripple tank? 7. roll a ball bearing so that it hits a fixed, hard surface (a metal plate) at several angles (including head-on). observe the way in which the ball bearing reflects. what generalization can you make about how a ball bearing reflects from a wall? have you proved that light can only behave like a wave?

1. study the scenario. the particles in some system are moving around quickly. a few minutes later, the particles are moving, on average, more slowly. how does this change in motion affect the temperature of the system? the temperature of the system did not change. the speed of the particles does not affect temperature, the number of particles affects the temperature.the temperature of the system is lower now than it was initially. faster moving particles result in a higher temperature for the system.the temperature of the system is higher now than it was initially. slower moving particles result in a higher temperature for the system.the temperature of the system did not change. the speed of the particles has no effect on the temperature, only the type of atom affects the temperature.

If we compare and contrast the three seen in the jar , the best explanation would be that