A student swings a 0.5kg rubber ball attached to a string over her head in a horizontal, circular path. The string is 1.5 meters long and in 60 seconds the ball makes 120 complete circles.

What is the velocity of the ball?

What is the ball’s centripetal acceleration?

What is the ball’s centripetal force?

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

speed of light in vacuum is 300,000 km/s

speed of light in other mediums is given by the expression v = c/n, where c is the speed of light in vacuum and n is the refractive index of medium.

for the first medium v = 200,000 km/s

  so, refractive index of medium = 300000/200000 = 1.5

    1.5 refractive index is usually for glass. so first medium is glass.

for the second medium v = 250,00 km/s

so, refractive index of medium = 300000/250000 = 1.2

    1.2 refractive index is usually for water. so second medium is water.

for the third medium v = 0 km/s

so, refractive index of medium = 300000/0 = ∞

    ∞ refractive index is usually for opaque mediums. so third medium is opaque medium.

electrical potential energy =0.072 j

explanation:

electrical potential energy is given by

u= q δv

q= charge=6 c

δv= potential difference and is given by

δv= e d

e= electric field

d= distance=5 mm=0.005 m

δv=2.4 (0.005)=0.012 v

now electric potential energy= u= q δv

u=6 (0.012)

u=0.072 j