subject
Physics, 15.01.2021 19:20 elenagarcia123

In one type of Combustion reaction, is combined with oxygen to create heat and light. A) nitrogen
B) carbon
C) hydrogen

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 00:00
1134567 a jet with mass m = 1.1 ฤƒโ€” 105 kg jet accelerates down the runway for takeoff at 2 m/s2. 1) what is the net horizontal force on the airplane as it accelerates for takeoff? 2.2*10^5 n your submissions: 2.2*10^5 computed value: 220000submitted: saturday, january 26 at 2: 41 pm feedback: correct! 2) what is the net vertical force on the airplane as it accelerates for takeoff? 0 n your submissions: 0 computed value: 0submitted: saturday, january 26 at 2: 41 pm feedback: correct! 3) once off the ground, the plane climbs upward for 20 seconds. during this time, the vertical speed increases from zero to 21 m/s, while the horizontal speed increases from 80 m/s to 95 m/s. what is the net horizontal force on the airplane as it climbs upward? n 4) what is the net vertical force on the airplane as it climbs upward? n 5) after reaching cruising altitude, the plane levels off, keeping the horizontal speed constant, but smoothly reducing the vertical speed to zero, in 13 seconds. what is the net horizontal force on the airplane as it levels off? n 6) what is the net vertical force on the airplane as it levels off?
Answers: 1
question
Physics, 22.06.2019 03:10
Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 nยทs/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.
Answers: 2
question
Physics, 22.06.2019 04:50
Asher cycles 12 miles in 16 hours. what is his speed?
Answers: 1
question
Physics, 22.06.2019 12:20
The diagram shows four locations in the electric field of a positive point charge m. at which location is the electric potential the greatest.
Answers: 2
You know the right answer?
In one type of Combustion reaction, is combined with oxygen to create heat and light. A) nitrogen<...
Questions
question
Mathematics, 05.10.2019 08:00
question
Social Studies, 05.10.2019 08:00
question
Mathematics, 05.10.2019 08:00
Questions on the website: 13722360