A typical ceiling fan running at high speed has an airflow of about 1.85 ✕ 103 ft3/min, meaning that about 1.85 ✕ 103 cubic feet of air move over the fan blades each minute. Determine the fan's airflow in m3/s.

0.8726  

Explanation:

We are to convert 1.85 x to

First, let us convert the numerator from ft3 to m3

1 ft3 = 0.0283 m3

Hence,

1.85 x ft3 = 1.85 x x 0.0283 m3

     = 52.355 m3

Now, let us convert the denominator from minutes to seconds

1 min = 60 sec

Therefore;

1.85 x = 52.355/60  

        = 0.8726  

in this image, you can see solar radiation going through ocean water.

no image, but probably absorption

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this