Hanna is fascinated by the development of factories and the history of mass production. Which type of society BEST fits Hanna's interests? A. hunting and gathering society

B. industrial society

C. agrarian society

D. horticultural society

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.

Ahair dryer is basically a duct in which a few layers of electric resistors are placed. a small fan pulls the air in and forces it through the resistors where it is heated. air enters a 1200 w hair dryer at 100 kpa and 22°c and leaves at 47°c. the cross-sectional area of the hair dryer at the exit is 60 cm2. neglecting the power consumed by the fan and the heat losses through the walls of the hair dryer, determine (a) the volume flow rate of air at the inlet and (b) the velocity of the air at the exit.

Ahole in the ground in the shape of an inverted cone is 14 meters deep and has radius at the top of 11 meters. the cone is filled to the top with sawdust. the density of the sawdust depends upon the depth, x, following the formula ρ ( x ) = 2.5 + 1.2 e − 0.7 x kg/m3. find the total mass of sawdust in the conical hole.