Can something move horizontally and vertically at the same time? Yes! Why? No! Why not?

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Apulley with mass mp and a radius rp is attached to the ceiling, in a gravity field of 9.81 m/s2 and rotates with no friction about its pivot.

In a heat engine if 1000 j of heat enters the system and the piston does 500j of work, what is the final internal energy of the system if the inital energy was 2000 j1.write the equation2.list out your known variables 3. plug the numbers into the equations4.solve 5.write your solution statement that includes initial energy and final energy added.