Conductivities are often measured by comparing the resistance of a cell filled with the sample to its resistance when filled with some standard solution, such as aqueous potassium chloride. The conductivity of water is 76 mS m^(-1) at 25 C and the conductivity of 0.100 mol dm^(-3) KCl (aq) is 1.1639 S m^(-1) A cell has a resistance of 33.21ohm when filled with 0.100 mol dm^(-3) KCl (aq) and 300.0 ohm when filled with 0.100 mol dm CHaCOOH (aq). What is the molar conductivity of acetic acid at that concentration and temperature?

1200 Sm^2mol^-1

Explanation:

Given data :

conductivity of water ( kwater ) = 76 mS m^-1 = 0.076 Sm^-1

conductivity of kcl (aq)( Kkcl ) = 1.1639 Sm^-1

Kkcl = 1.1639 - 0.076 = 1.0879  Sm^-1

Resistance = 33.21 Ω

where conductivity can be expressed as =

hence cell constant = conductivity * Resistance

                                 = 1.0879 * 33.21 = 36.13m^-1

conductivity of  CH3COOH ( kCH3COOH ) =  36.13 / 300

                                                                       = 0.120 Sm^-1

Determine the molar conductivity of acetic acid

= ( kCH3COOH * 1000 ) / C

C = 0.1 mol dm

=  (0.120 * 1000) / 0.1  =  1200 Sm^2mol^-1

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

i would say