Physics, 22.02.2021 20:40 amberwithnell12512

Distinguish between damped and forced oscillations. What do you
mean by resonant oscillations?

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 11:00

Arowboat passenger uses an oar to push the boat off the dock by exerting a force of 40n for 3.0s. what impulse acts on the boat.

Answers: 1

Answer

Physics, 22.06.2019 14:30

What is the relationship between the direction of motion of the balloon and the wind currents

Answers: 1

Answer

Physics, 22.06.2019 16:50

Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =

Answers: 1

Answer

Physics, 22.06.2019 20:50

An ideal otto cycle has a compression ratio of 8. at the beginning of the compression process, air is at 95 kpa and 27°c, and 750 kj/kg of heat is transferred to air during the constant-volume heat-addition process. assuming constant specific heats at room temperature, determine (a) the pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. (4390 kpa, 1730 k; 423 kj/kg; 56.4%; 534 kpa)