subject
Physics, 01.03.2021 21:30 bluenblonderw

A simplified model of a bungee jump can be analyzed in two sections: a freefall section in which the bungee cord has not yet begun stretching and a section in the lower portion of the jump in which the bungee cord stretches and exerts a force on the jumper. The cord is assumed to exert zero force on the jumper until its length exceeds its maximum unstretched length. Determine the maximum unstretched length of a bungee cord of spring constant 100 N/m such that a 70-kg jumper will not hit the ground when jumping from a height of 45 m.

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 08:20
The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?
Answers: 2
question
Physics, 22.06.2019 12:10
Awater slide of length l has a vertical drop of h. abby's mass is m. an average friction force of magnitude f opposes her motion. she starts down the slide at initial speed vi. use work-energy ideas to develop an expression for her speed at the bottom of the slide. then evaluate your result using unit analysis and limiting case analysis. express your answer in terms of the variables h, m, l, vi, f and appropriate constants. vf v f
Answers: 2
question
Physics, 22.06.2019 12:30
Write a full page that sumerizes thermodynamics itโ€™s from the website visionlearnig
Answers: 1
question
Physics, 22.06.2019 14:20
Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.
Answers: 1
You know the right answer?
A simplified model of a bungee jump can be analyzed in two sections: a freefall section in which the...
Questions
question
Social Studies, 04.11.2020 16:30
question
Business, 04.11.2020 16:30
Questions on the website: 13722361