A simple pendulum is used to measure gravity using the following theoretical equation, TT=2ππ�LL/gg ,where L is the length of the pendulum, g is gravity, andT is the period of pendulum. Twenty measurements of T give a mean of 1.823 seconds and a standard deviation of 0.0671 s. The device used to measure time has a resolution of 0.02 s. The pendulum length is measured once to be 0.823 m (with a scale having a resolution of 0.001 m). Determine the value of g and its uncertainty (assume 90% confidence where necessary). You may use any method of uncertainty propagation that we covered in class.

g ±Δg = (9.8 ± 0.2) m / s²

Explanation:

For the calculation of the acceleration of gravity they indicate the equation of the simple pendulum to use

          T =

          T² =  4pi2 L / g

          g =

They indicate the average time of 20 measurements 1,823 s, each with an oscillation

let's calculate the magnitude

           g = 4 pi2 0.823 / 1.823 2

            g = 9.7766 m / s²

now let's look for the uncertainty of gravity, as it was obtained from an equation we can use the following error propagation

for the period

             T = t / n

             ΔT = Δt + ΔDn

In general, the number of oscillations is small, so we can assume that there are no errors, in this case the number of oscillations of n = 1, consequently

              ΔT = Δt / n

              ΔT = Δt

now let's look for the uncertainty of g

             Δg = ΔL +  ΔT

             Δg =   ΔL + 4π²L  (-2  T⁻³) ΔT

a more manageable way is with the relative error

we substitute

              Δg = g ( \frac{\Delta L }{L} + \frac{1}{2}  \frac{\Delta T}{T}DL / L + ½ Dt / T)

the error in time give us the stanndard deviation  

let's calculate

               Δg = 9.7766 ()

               Δg = 9.7766 (0.001215 + 0.0184)

               Δg = 0.19 m / s²

the absolute uncertainty must be true to a significant figure

                Δg = 0.2 m / s2

therefore the correct result is

               g ±Δg = (9.8 ± 0.2) m / s²