Physics, 08.03.2021 05:30 dondre54

The pole in the figure is a a 90° bend in a power line and is therefore subjected to more shear force than poles in straight parts of the line. The tension in the two wires at the top of the pole is 3.5 × 104 N, and both wires are at an angle of 80° with respect to the pole. The pole is 15 m tall, has an 16 cm diameter and can be considered to have half the strength of hardwood (hardwood has a Young's modulus of 1.5×1010 N/m2 and a shear modulus of 1×010 N/m2). First ignore the guy wire (Tgw). Calculate the compression of the pole, in millimeters?

Still ignoring the guy wire, Find how much it bends in mm to the right?

Now find the tension in the guy wire used to keep the pole straight if it is attached to the top of the pole at an angle of 30° with the vertical in Newtons? (The guy wire must be in the opposite direction of the bend.)

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 23:20

According to newton's second law, when the same force is applied to two objects of different masses, a the object with greater mass will experience a great acceleration, and the object with less mass will experience an even greater acceleration, b. the object with greater mass will experience a smaller acceleration, and the object with less mass will experience a greater acceleration, c. the object with greater mass will experience a greater acceleration, and the object with less mass will experience a smaller acceleration, d. the object with greater mass will experience a small acceleration, and the object with less mass will experience an even smaller acceleration.

Answers: 1

Answer

Physics, 22.06.2019 00:50

Acave rescue team lifts an injured spelunker directly upward and out of a sinkhole by means of a motor-driven cable. the lift is performed in three stages, each requiring a vertical distance of 10.0 m: (a) the initially stationary spelunker is accelerated to a speed of 4.90 m/s; (b) he is then lifted at the constant speed of 4.90 m/s; (c) finally he is decelerated to zero speed. how much work is done on the 68.0 kg rescue by the force lifting him during each stage?

Answers: 1

Answer

Physics, 22.06.2019 09:00

A2000 kg car is rounding a curve of radius 200 m on a level road. the maximum frictional force the road can exert on the tires of the car is 4000 n. what is the highest speed at which the car can round the curve?

Answers: 1

Answer

Physics, 22.06.2019 13:10

A0.750 kg aluminum pan is removed from the stove and plunged into a sink filled with 10.0 kg of water at 293 k. the water temperature quickly rises to 297 k. what was the initial temperature of the aluminum pan? the specific heat of aluminum is ca = 900 j/(kgk) and water is cw = 4190 j/(kgk)

Answers: 3

Answer

You know the right answer?

The pole in the figure is a a 90° bend in a power line and is therefore subjected to more shear forc...

Questions