subject
Physics, 26.03.2021 23:50 donnafranks2003

Determine the speed of light in fused quartz if fused quartz has an index of refraction of 1.46.

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 04:50
The position of a crate sliding down a ramp is given by x=(0.05t^3) m, y=(1.7t^2) m, z=(6โˆ’0.85t^5/2) m, where t is in seconds. (a) determine the magnitude of the crate's velocity when t = 2 s. (b) determine the magnitude of the crate's acceleration when t = 2 s.
Answers: 2
question
Physics, 22.06.2019 05:00
The earth is constantly spinning on its axis, like you might spin a basketball on your finger. it is this spinning of the earth that causes
Answers: 3
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
question
Physics, 22.06.2019 14:10
Amachinist turns the power on to a grinding wheel, at rest, at time t = 0 s. the wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 96 rad/s. the wheel is run at that angular velocity for 40 s and then power is shut off. the wheel slows down uniformly at 1.5 rad/s2 until the wheel stops. in this situation, the time interval of deceleration is closest to:
Answers: 3
You know the right answer?
Determine the speed of light in fused quartz if fused quartz has an index of refraction of 1.46....
Questions
question
English, 27.03.2020 06:13
question
History, 27.03.2020 06:14
Questions on the website: 13722367