Physics, 30.03.2021 20:40 Jasten

What is the equivalent resistance REQ between point E and point F? What is the current along Path 1? … Path 2?

What is the current out of the battery?

What is the power of bulb B1? … bulb B2?

What is the equivalent resistance REQ between point E and point F?

What is the current along Path 1? … Path 2?

What is the current out of the battery?

What is the power of bulb B1? … bulb B2?

the picture shows two level circuit with path one is point a and b in the middle is a light bulb B1
the second level path 2 shows lightbulb B2 and point c and d
and on the last level is point e and point f with a batter closer to point f.
point c and point e are not connected as there is an opening in the path

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 22:00

Atank holds 1000 gallons of water, which drains from the bottom of the tank in half an hour. the values in the table show the volume v of water remaining in the tank (in gallons) after t minutes.t(min) 5 10 15 20 25 30v(gal) 694 444 250 111 28 0(a) if p is the point (15, 250) on the graph of v, find the slopes of the secant lines pq when q is the point on the graph with t = 5, 10, 20, 25, and 30.(b) estimate the slope of the tangent line at p by averaging the slopes of two secant lines.(c) use a graph of the function to estimate the slope of the tangent line at p. (this slope represents the rate at which the water is flowing from the tank after 15 minutes.)show all steps.

Answers: 2

Answer

Physics, 22.06.2019 18:00

Consider an ideal gas at 27.0 degrees celsius and 1.00 atmosphere pressure. imagine the molecules to be uniformly spaced, with each molecule at the center of a small cube. what is the length l of an edge of each small cube if adjacent cubes touch but don't overlap?

Answers: 2

Answer

Physics, 22.06.2019 18:30

A1000-kg car is moving at 30 m/s around a horizontal unbanked curve whose diameter is 0.20 km. what is the magnitude of the friction force required to keep the car from sliding?

Answers: 3

Answer

Physics, 23.06.2019 00:00

Three resistors are connected in series across a 15-v power supply. if the potential drops across resistors 1 and 2 are 4.1 volts and 3.1 volts, what is the exact potential drop (in volts) across resistor 3?

Answers: 2

Answer

You know the right answer?

What is the equivalent resistance REQ between point E and point F? What is the current along Path 1...

Questions